E-BISON THREE-WAY tipper: load, transport, unload—all with ease
The E-Bison three-way tipper is compatible with electric, thermal, hybrid chassis, offering versatile solutions to customers’ requirements.
The tipper is made of traditional steel, but high-strength steel and aluminum versions are also available. These quality materials ensure durability while keeping a lighter weight compared to conventional steel.
With a cathodic dip coating and powder coating, our tippers resist up to 1,000 hours in saline fog, according to ISO 9227 automotive quality standards, ensuring protection against moisture and wear.
Wide range of HOMOLOGATED equipment configurations for the main commercial vehicles currently on the market.
E-Bison three-way tippers are tested according to the latest international standards, ensuring the highest safety and quality.
Our in-house testing center develops and tests new solutions to anticipate market demands and meet customer needs.
95% of components are produced internally within the FAIST group, ensuring superior quality control.
The production of our E-BISON three-way tippers is carried out using advanced technologies and processes, leveraging renewable energy and recyclable materials. With a constant focus on innovation and sustainability, our tri-axle tippers provide superior performance and reduced environmental impact.
E-Bison: Versatile, Durable, Safe
Tipping bed structure
The tipping bed is made of two parts with a single central joint, ensuring greater resistance, structural strength, and protection against the stresses that can occur while operating.
The loading bed of the float is equipped with retractable U-shaped load lashing rings tested according to DIN 75410-1 and UNI EN 12640 standards.
The housing of the rings, stamped on the loading bed of the tipper, prevents the formation of sharp corners,
facilitating cleaning and avoiding deposits of material residues.
BOARDS
Aluminum boards, height 400 mm, with a profile suitable for load anchoring:
Opening angle of 180°.
Large surface customizable by applying adhesive films.
Tipping pins with self-lubricating hinges and integrated yellow anchoring hooks
providing an additional load securing point.
Anti-fall tailboard hook
Bumpers stops.
Curved Edge for Increased Strength
The rear and side edges of the loading bed end with a curved protection, made of one piece from the bottom itself.
Structural reinforcement: The 'curved edge' strengthens the rear and the side of the tipper, ensuring greater durability during the transport of heavy loads.
Ease of Unloading: Thanks to its curved design, facilitates the unloading phase of material from the tipper, enhancing operational efficiency.
Board protection:Its function is to reinforce the rear and the side of the tipper when loading unloading, guiding efficiently the flow of the transported material, while protecting the boards.
CAB PROTECTOR
Exclusive SCATTOLINI design, available in straight or curved version to meet every transportation need.
Optimal visibility: Perforated central panel for great driver’s rearwards visibility while driving and during loading/unloading operations.
Load securing: Upper beam provided with round-edged holes to secure the equipment, giving greater stability during transportation.
Subframe structure
The tipping bed is made of two parts with a single central joint, ensuring greater resistance, structural strength, and protection against the stresses that can occur while operating.
Rubber bump and PVC protections to prevent direct contact between the loading bed and the subframe.
Standard safety systems
Standard safety post fixed to the exterior of the subframe of the tipper.
Ergonomic control panel
Yellow configuration bar: an intuitive and easy-to-use device that guides the insertion of pins into the correct sockets, ensuring proper match and avoiding any incidents when selecting the tipping mode.
Tipper ascent and descent buzzer alarm.
QUALITY
Tipping bed made of two parts with a single central joint
Tippers tested for 10,000 cycles with a 2.5-ton load fixed to the bottom of the bed
Cataphoresis treatment and powder coating
Fall protection system for the rear tailgate
BUZZER ALARM
Standard safety post fixed to the exterior of the subframe of the tipper.
Ergonomic control panel
Use of renewable energy, partly generated by our photovoltaic system.
Technologies that reduce industrial emissions and the consequent impact on the environment.
Green materials for reducing the carbon footprint and promoting a circular economy.
Aluminum and high-strength steel.
Weight optimization with guaranteed strength.
Development of solutions that reduce weight to increase load capacity.
Additional options:
Removable and made of steel or aluminum for certain versions.
Made of high-performance materials carefully chosen to provide structural strength and corrosion resistance.
Perforated central panel for great driver’s rearwards visibility while driving and during loading/unloading operations.
Upper beam provided with round-edged holes to secure the equipment, giving greater stability during transportation.
Aerodynamic Design and Fuel Efficiency
The streamlined aerodynamic shape of the
curved cab protector perfectly fits the vehicle cabin, reducing air resistance during driving and consequently fuel
consumption, optimizing vehicle performance.
Facilitates access to the loading bed
Innovative tool holder equipped with a spring that locks the tools in place, preventing vibrations.
Removable rear ladder rack bolted to the rear uprights of the vehicle.
Designed for an easy insert or removal depending on the vehicle’s loading requirements.
Top beam equipped with large-sized holes, facilitating secure fastening of the transported material.
Top part of the beam protected by a non-slip and wear-resistant PVC profile.
The toolbox is an exclusive creation by Scattolini, featuring:
An aluminum handle that provides a comfortable and sturdy grip for opening and closing the toolbox.
Steel brackets for easy and secure attachment to the subframe, and a sealing gasket to protect the interior of the toolbox from weather elements and dust.
Toolpod available in hybrid version (high-strength steel structure with aluminum doors) or entirely in
aluminum, in various sizes.
Options to add shelves and 12 mm plywood dividers, allowing customers to configure the interior of the cabinet according to their needs and the equipment to be transported.
Side doors equipped with locking handles, with an IP55 waterproof rating.
Option to add a practical aluminum mesh tool holder with a height of 250 mm on top of the cabinet, height = 840 mm.
Aluminum bumper kit, essential for road user protection. New support with lateral and in-depth adjustment on the vehicle.
Steel mesh extensions height 700 mm allow for load visibility and excellent rear view while driving. They are often used for transporting materials such as waste and wood.
Aluminum extensions are made of an additional set of panels height 400 mm and offer further load protection, preventing the spillage of materials during transport, such as sand, gravel, or soil.
Exclusive SCATTOLINI design rope tensioners bolted to the bottom of the loading bed
Equipped with a toothed gear to securely fasten the ropes.
The rear lamps protection grids are an exclusive SCATTOLINI
product.
The modern design and the geometric shape allow for optimal
and reinforced protection of the lights while ensuring their visibility.